DLI EPCDC32 User's Guide
|
The controller's firmware can be upgraded to a newer version by first uploading it, and the committing the upgrade.
You can upload a file or specify a URI where it can be downloaded from. Be sure to disable the same subnet restriction if you intend to download firmware from a server not in your local network.
By default, the unit beeps and blinks during update. You can disable this using the following form.
You may protect the current firmware from modification. Pressing the hardware reset button will be required to unlock.
After the firmware has been uploaded, you are presented with a form to perform the upgrade.
You can double-check the firmware version. If you wish to cancel the upgrade, it's best to explicitly press 'cancel' in the form so that the uploaded file could be cleaned up.
When you start an upgrade, a message about this briefly appears on the LCD.
Further activity is indicated by a cycling pattern of signs.
After an upgrade has been completed, the unit is rebooted. The first boot may take longer than usual due to configuration updates.